Maintenance and Troubleshooting
113
8.4.
Self-Diagnostics (Executive Treadmill Only)
Note: You can also manually initiate diagnostic testing from the
Menu Screen by pressing SETTINGS, then DIAGNOSTICS.
If errors occur during treadmill operation, an error message is
displayed and the Diagnostics key provides the option to begin
the treadmill’s self-diagnostic routine.
When diagnostics are
started, a warning appears.
After reading it, straddle
the treadmill by stepping on
the traction strips on the
sides of the treadbelt.
Press
TEST
to continue.
The treadmill begins self-
testing. The screen
prompts you with “Yes or
No” questions to assist with
diagnosis.
When self-test is complete,
one of the following
messages is displayed:
•
No Errors Detected
•
Error Detected, Contact Service Provider
.
For more information, contact your selling dealer or go to
www.landice.com and click Service Locator on the upper right.