Landice 90 Series Page 74 Owner'S Manual Download

Page: 74 / 114

Executive Treadmill Operation

Press and hold

(–)

key to decrease incline or speed.

Pressing for longer than 2 seconds decreases incline or
speed more quickly. Release the key when display
indicates desired incline or speed.

The left and right arrows move between motivational
screens.

The Express Speed and Express Incline keys, in
conjunction with the numeric keypad, allow you to
directly enter a target speed or incline without using the
(+/–) keys. Press

EXPRESS SPEED

EXPRESS

INCLINE

, then enter the desired value using the

numeric keypad. Then press

ENTER

or wait 3 seconds

for the treadmill to adjust to the new settings.

Press

HOME

to view the Main Menu screen at any time

during your workout.

Table 6-1 Executive Control Panel Functions (Continued)

Function

Description

Summary of Contents for 90 Series



















































































































Search results

Summary of Contents for 90 Series

Reviews:

Related manuals for 90 Series

Brands by name

Popular brands

Landice 90 Series, Owner'S Manual

Search results

Summary of Contents for 90 Series

Reviews:

Related manuals for 90 Series

Brands by name

Popular brands