$
$
1
2
13
13
#
1
2
3
20
1
9
English
12 EN
15. Hot water dispensing
:LWKWKH'26(.(<6
1
and
2
.
After positioning a container under the dispensing nozzle, the product can be dispensed in two ways:
In CONTINUOUS mode, using the
START
key.
Scalding hazard!
Use the appropriate insulating devices to move the water and steam wands.
16. Steam dispensing
Use the selector (
13
) knob to select
the type of frothed milk from the four
available settings (
TS1 ÷ TS4
).
The type of frothing is displayed on the
touch screen.
Press the selector (
13
) to start
dispensing. Once the set temperature
is reached, the steam will stop
automatically.
Insert the steam dispensing
wand (
9
) in a suitable container.
Turn the steam knob (
20
)
clockwise to start dispensing
and counter-clockwise to stop it.
Note: At the conclusion of each steam dispensing
phase, clean the inside of the steam nozzle as
follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.
Dispensing with the Turbosteam selector (13)
Steam dispensing with knob control (20)
Scalding hazard!
Use the appropriate insulating devices to move the water and steam wands.
The bar below the water buttons
indicates the temperature of the water:
longer bar = higher temperature.
02_M100_multi_ridotto.indd 12
11/03/2014 10:27:58
