Kyocera TASKalfa 266ci, Operation Manual

Page: 352 / 402

10-12
Troubleshooting > Solving Malfunctions
Cannot send via SMB. Is the network cable connected? Connect the correct network cable
securely. 2-10
Have the network settings for the
equipment been configured properly? Configure the TCP/IP settings
properly. 9-19
Have the folder sharing settings been
configured properly? Check sharing settings and access
privileges under the folder properties. 6-7
Has the SMB protocol been set to
[On]? Set the SMB protocol setting to [On]. 2-32
Has the [Host Name] been entered
properly?* Check the name of the computer to
which data is being sent. 6-5
Has the [Path] been entered properly? Check the share name for the shared
folder. —
Has the [Login User Name] been
entered properly?*,** Check the domain name and login
user name. 6-18
Has the same domain name been
used for the [Host Name] and [Login
User Name]? Delete the domain name and
backslash ("\") from the [Login User
Name]. 6-18
Has the [Login Password] been
entered properly? Check the login password. 6-18
Have exceptions for Windows Firewall
been configured properly? Configure exceptions for Windows
Firewall properly. 6-10 , 6-13
Do the time settings for the equipment,
domain server, and data destination
computer differ? Set the equipment, domain server, and
data destination computer to the same
time. —
Is the touch panel displaying Send
error .?
Refer to Responding to Send Error . 10-19
* You can also enter a full computer name as the host name (for example, pc001.abcdnet.com).
** You can also enter login user names in the following formats:
Domain_name/user_name (for example, abcdnet/james.smith)
User_name@domain_name (for example, james.smith@abcdnet)
Symptom Checkpoints Corrective Actions Reference
Page