KYMCO DINK 200, Manual, Page: 70 / 225

6
. CYLINDER HEAD/VALVES
6-5
DINK 200
Remove the camshaft gear from the cam chain
to remove the camshaft.
CAMSHAFT INSPECTION
Check each cam lobe for wear or damage.
Measure the cam lobe height.
Service Limits:
SH40AA IN: 30.75mm replace if below
Check each camshaft bearing for play or
damage. Replace the camshaft assembly with
a new one if the bearings are noisy or have
excessive play.
CAMSHAFT HOLDER DISASSEMBLY
Take out the valve rocker arm shafts using a
6mm bolt and screwdriver.
Remove the valve rocker arms.
Cam Chain
Camshaft Gear
Camshaft Bearings
Valve Rocker Arms
Rocker Arm Shafts
Screwdriver