KYMCO DINK 200, Manual, Page: 145 / 225

12
. COOLING SYSTEM
12-17
DINK 200
THERMOSTAT INSPECTION
Suspend the thermostat in a pan of water
over a burner and gradually raise the water
temperature to check its operation.
Technical Data
Begins to open 80
±
2
℃
Full-open 90
℃
Valve lift 3.5
_
4.5mm
THERMOSTAT INSTALLATION
The installation sequence is the reverse of
removal.
Fill the cooling system with the specified
coolant. (

3-9)
•
Do not let the thermostat touch the pan
as it will give a false reading.
•
Replace the thermostat if the valve
stays open at room temperature.
•
Test the thermostat after it is opened
for about 5 minutes and holds the
temperature at 70
℃
.
＊
Thermostat
O-ring
Thermometer
Thermostat Housing
Thermostat Housing
Replace the O-ring with a new one and
apply grease to it.
＊