KYMCO DINK 200, Manual, Page: 137 / 225

12
. COOLING SYSTEM
12-9
DINK 200
Set the two tabs under the air duct into the
grooves on the radiator lower part and then
secure the radiator with the two screws.
Fill the radiator with coolant. (

3-9)
After installation, check for coolant leaks.
WATER PUMP
MECHANICAL SEAL (WATER SEAL)
INSPECTION
Inspect the telltale hole for signs of
mechanical seal coolant leakage.
If the mechanical seal is leaking, remove the
right crankcase cover and replace the
mechanical seal.
WATER PUMP/IMPELLER REMOVAL
Remove the engine from the frame. (

5-3)
Air Duct
Right Crankcase Cover
Telltale Hole
Water Pump
Screws