KYMCO DINK 200, Manual, Page: 204 / 225

17
. IGNITION SYSTEM
17-5
DINK 200
RESISTANCE INSPECTION
Measure the resistance between the terminals.
Replace the CDI unit if the readings are not
within the specifications in the table below.
Use the
x
K
Ω
range for the Sanwa Tester.
Use the
x
100
Ω
range for the Kowa Tester.
Unit: K
Ω
(+)Probe
(-)Probe
(Black/Blue) (Black/Yellow) (Green/White)
(Blue/Yellow)
(Green)
(Black/Blue) 150~280 20~30 20~30 ∞
(Black/Yellow) 75~100 50~70 50~70
∞
(Green/White) 7~10 50~70 ∞
(Blue/Yellow)
7~10 50~70 ∞
(Green) ∞ ∞ ∞ ∞
Different data from different supplier.
(Green/White)
(Green)
(Black/Yellow)
(Black/Blue)
(Blue/Yellow)
•
Due to the semiconductor in circuit, it
is necessary to use a specified tester
for accurate testing. Use of an
improper tester in an improper range
may give false readings.
•
Use a Sanwa Electric Tester (07308-
0020000) or Kowa Electric Tester
(TH-5H).
•
In this table, “Needle swings then
returns” indicates that there is a
charging current applied to a condenser.
The needle will then remain at “
∞
”
unless the condenser is discharged.
＊