KYMCO DINK 200, Manual, Page: 51 / 225

3
. INSPECTION/ADJUSTMENT
3-11
DINK 200
NUTS/BOLTS/FASTENERS
Check all important chassis nuts and bolts for
looseness.
Tighten them to their specified torque values
if any looseness is found.
WHEELS/TIRES
Check the tires for cuts, imbedded nails or
other damages.
Check the tire pressure.
Tire Pressure
1 Rider 2 Riders
Front 1.75kg/cm
_
1.75kg/cm
_
Rear 2.00kg/cm
_
2.25kg/cm
_
STEERING HANDLEBAR
Raise the front wheel off the ground and
check that the steering handlebar rotates
freely.
If the handlebar moves unevenly, binds, or
has vertical movement, adjust the steering
head bearing.
SUSPENSION
Check the action of the front/rear shock
absorbers by compressing them several times.
Check the entire shock absorber assembly for
oil leaks, looseness or damage.
Jack the rear wheel off the ground and move
the rear wheel sideways with force to see if
the engine hanger bushings are worn.
Replace the engine hanger bushings if there is
any looseness.
•
Tire pressure should be checked when
tires are cold.
°Ø
Pressure Gauge