KYMCO DINK 200, Manual, Page: 161 / 225

13
. FUEL SYSTEM/CARBURETOR/FUEL PUMP
13-15
DINK 200
FLOAT LEVEL INSPECTION
Measure the float level at the location of the
main jet (just contacting the float valve).
Float Level : 18.5
±
1.0mm
Replace the float if the level is incorrect.
Check the operation of the float and then
reinstall the float chamber.
VACUUM CHAMBER ASSEMBLY
First install the jet needle and spring into the
vacuum chamber and then install the needle
holder.
Install the vacuum piston into the carburetor
body.
Install the spring.
Diaphragm
Float
Spring Vacuum Piston
•
Align the hole in the diaphragm with
the vacuum passage in the carburetor
body.
＊
Diaphragm
Spring
Vacuum Piston
Needle Holder
Jet Needle