Kubota M108S, Workshop Manual

Page: 70 / 523

G-53
M108S, WSM G GENERAL
Injector Adaptor for Measuring Cylinder Compression Pressure
Application : Use for measuring diesel engine compression pressure.
A 16.14 to 16.20 mm dia. (0.6355 to 0.6377 in. dia.) W 65 mm (2.6 in.)
B 29.80 to 30.00 mm dia. (1.174 to 1.181 in. dia.) X 102.5 mm (4.035 in.)
C 41 mm (1.6 in.) Y 112 mm (4.41 in.)
D 11 mm (0.43 in.) Z 112.6 mm (4.433 in.)
E 0.271 rad (15.5 °) a 20.3 to 20.5 mm (0.800 to 0.807 in.)
F 20.5 to 21.0 mm (0.807 to 0.826 in.) b 120.7 to 121.3 mm (4.752 to 4.775 in.)
G 5.0 mm (0.20 in.) c 5.0 mm (0.20 in.)
H 2.09 rad (120 °) d 146 mm (5.75 in.)
I 3.0 mm (0.12 in.) e 28.5 mm (1.12 in.)
J 13.000 to 13.011 mm (0.51182 to 0.51224 in.) f 11 mm (0.43 in.)
K 44 mm (1.7 in.) g 12.9835 to 13.0055 mm (0.511162 to 0.512027 in.)
L 112.6 mm (4.433 in.) h 5/8-18UNF-2B
M 19.84 to 19.95 mm (0.7811 to 0.7854 in.) i 3.0 mm dia. (0.12 in. dia.) through hole
N 16.14 to 16.20 mm (0.6355 to 0.6377 in.) j 0.271 rad (15.5 °)
O 19.06 to 19.20 mm (0.7504 to 0.7559 in.) k
3.0 mm dia., 134.5 to 135.5 mm depth
(0.12 in. dia., 5.296 to 5.334 in. depth)
P 16.89 to 17.00 mm (0.6650 to 0.6692 in.) l 11 mm (0.43 in.)
Q 7.10 to 7.20 mm (0.280 to 0.283 in.) m 0.8 mm radius (0.03 in. radius)
R 16 mm dia. (0.63 in. dia.) n 0.4 mm radius (0.02 in. radius)
S 18 mm (0.71 in.) o Ra = 1.6a
T 48.6 mm (1.91 in.) p Ra = 3.2a
U 7.10 to 7.20 mm (0.280 to 0.283 in.) C0.5 Chamfer 0.5 mm (Chamfer 0.02 in.)
V 53.6 mm (2.11 in.) C1 Chamfer 1.0 mm (Chamfer 0.039 in.)
(1) Material S43C-D (2) Material SS400 (3) O-ring
KiSC issued 06, 2007 A