Kubota M108S, Workshop Manual

Page: 148 / 523

1-S25
M108S, WSM ENGINE
[3] DISASSEMBLING AND ASSEMBLING [V3800-CR-TI]
(1) External Components
Air Cleaner, Muffler and Others
1. Remove the air cleaner and muffler.
2. Remove the fan, fan belt, alternator and starter.
(When reassembling)
• Check to see that there are no cracks on the belt surface.
IMPORTANT
■
• After installing the fan belt, be sure to adjust the fan belt
tension.
• Do not confuse the direction of the fan. Attach the fan with
its part number marking facing frontward (toward the
radiator).
W1049622
(2) Turbocharger
CAUTION
• While the engine is running and or just after it stops, the turbocharger is hot, be careful not to touch the
turbocharger.
NOTE
■
• When detaching and attaching the turbocharger assembly, be very careful not to allow dust, dirt and other
foreign matter in the oil pipes.
• When the turbocharger assembly has been replace, pour fresh engine oil through the oil filler port of the
turbocharger.
• Before starting the engine, make sure that air cleaner is in position.
Oil Pipe
1. Remove the cover.
2. Remove the oil pipe.
3. Remove the return pipe.
(When reassembling)
• Pour fresh engine oil through the oil filler port of the turbocharger.
• Replace the gasket with new one.
• Be careful not to allow dust, dirt and other foreign matters in the
oil pipes.
NOTE
■
• Tape or plug all openings to prevent foreign matters from
damaging the oil cavities in the turbocharger.
W1025983
(1) Cover
(2) Oil Pipe (3) Return Pipe
KiSC issued 06, 2007 A