Kubota M108S, Workshop Manual

Page: 46 / 523

G-29
M108S, WSM G GENERAL
Sliding Air Conditioner Condenser
CAUTION
• The condenser and receiver become hot while the air
conditioner is running. Before checking or cleaning them,
wait long enough until they cool down.
1. Release the air conditioner hoses off the hook.
2. Loosen the wing nut.
3. Hold the handle, slide the air conditioner condenser assembly
toward yourself.
IMPORTANT
■
• Do not hold the air conditioner receive or the air conditioner
pipes when sliding out the condenser for cleaning.
W1048917
Adjusting Air Conditioner Belt Tension
CAUTION
• Be sure to stop the engine before checking air conditioner
belt tension.
1. Stop the engine and remove the key.
2. Apply 98 N (10 kgf, 22 lbf) pressure to the belt between the
pulleys.
3. If tension is incorrect, loosen the tension pulley mounting nut and
turn the adjusting bolt to adjust the belt tension within acceptable
limits.
4. If belt is damaged, replace it.
W1049284
[6] CHECK POINT OF EVERY 300 HOURS
Changing Engine Oil
1. Refer to “[2] CHECK POINTS OF INITIAL 50 HOURS” in this
section.
W1049642
(1) Condenser
(2) Receiver
(3) Handle
(4) Wing Nut (5) Air Conditioner Hose
(6) Hook
A : PULL
Air conditioner belt
tension
Factory spec.
A deflection of between
10 to 12 mm (0.40 to 0.47
in.) when the belt is
pressed in the middle of
the span
(1) Adjusting Bolt
(2) Tension Pulley Mounting Nut A : Deflection
KiSC issued 06, 2007 A