Kubota M108S, Workshop Manual

Page: 53 / 523

G-36
M108S, WSM G GENERAL
5. Adding the LLC
(1) Add only water if the mixture reduces in amount by
evaporation.
(2) If there is a mixture leak, add the LLC of the same
manufacture and type in the same mixture percentage.
*Never add any long-life coolant of different manufacture.
(Different brands may have different additive components, and
the engine may fail to perform as specified.)
6. When the LLC is mixed, do not employ any radiator cleaning
agent. The LLC contains anticorrosive agent. If mixed with the
cleaning agent, sludge may build up, adversely affecting the
engine parts.
7. Kubota's genuine long-life coolant has a service life of 2 years.
Be sure to change the coolant every 2 years.
NOTE
■
• The above data represents industry standards that
necessitate a minimum glycol content in the concentrated
anti-freeze.
• When the coolant level drops due to evaporation, add water
only to keep the antifreeze mixing ratio less than 50 %. In
case of leakage, add antifreeze and water in the specified
mixing ratio before filling in to the radiator.
W1053945
Replacing Radiator Hose (Water Pipes)
1. Replace the hoses and clamps.
Refer to “[5] CHECK POINTS OF EVERY 200 HOURS” in this
section.
W1054349
Replacing Intake Air Line
1. Replace the hoses and clamps.
Refer to “[5] CHECK POINTS OF EVERY 200 HOURS” in this
section.
W1034887
Replacing Fuel Hose
1. Replace the fuel hose and clamps, if necessary.
Refer to “[4] CHECK POINTS OF EVERY 100 HOURS” in this
section.
W1054573
Replacing Power Steering Hose
1. Replace the hoses and clamps, if necessary.
Refer to “[5] CHECK POINTS OF EVERY 200 HOURS” in this
section.
W1054527
KiSC issued 06, 2007 A