Kubota M108S, Workshop Manual

Page: 209 / 523

2-S14
M108S, WSM CLUTCH
Damper Disc
1. Remove the damper disc (1).
(When reassembling)
• Confirm that the bearing (2) is surely assembled to the flywheel.
• Direct the shorter end of the damper disc boss toward the
flywheel.
• Apply molybdenum disulphide (Three Bond 1901 or equivalent)
to the shaft A.
IMPORTANT
■
• Align the center of damper disc and flywheel by inserting the
clutch center tool (3) (Code No. 07916-53041).
W1016312
(2) Removing Shuttle Clutch Valve
Shuttle Clutch Valve
1. Remove the floor mat (1) and inspection plate (2).
2. Remove the shuttle valve (3).
(When reassembling)
W1016768
Tightening torque
Damper disc mounting
screw
48 to 55 N·m
4.9 to 5.7 kgf·m
36 to 41 lbf·ft
(1) Damper Disc
(2) Bearing (3) Clutch Center Tool
Tightening torque
HI-LO pipe retaining nut
30 to 39 N·m
3.0 to 4.0 kgf·m
22 to 28 lbf·ft
Delivery pipe retaining nut
49 to 68 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
Shuttle valve mounting
screw
24 to 27 N·m
2.4 to 2.8 kgf·m
18 to 20 lbf·ft
(1) Floor Mat
(2) Inspection Plate
(3) Shuttle Valve (4) Delivery Pipe
(5) HI-LO Pipe
KiSC issued 06, 2007 A