Kubota M108S, Workshop Manual

Page: 473 / 523

10-M9
M108S, WSM CABIN
■
Defrosting or demisting
To defrost or demist the windshield, take the following
steps.
1. Set the mode switch (2) to the (c) position.
2. Open the front air outlet, door air outlet direct it to the
windshield.
3. Set the recirculation / fresh air selection lever to the
“FRESH AIR” position.
4. Set the blower switch (4) and the temperature control
dial to the “3” and max “Warm” (end of clockwise)
position, respectively.
NOTE
■
• If you set the temperature control dial (1) to
“Cool” side position at (c) position, cool air will
not come out from the face air outlets.
W1014984
(1) Temperature Control Dial
(2) Mode Switch
(3) Door Air Outlet
(4) Blower Switch (A) Warm
(B) Open
(C) Shut
KiSC issued 06, 2007 A