Kubota M108S, Workshop Manual

Page: 61 / 523

G-44
M108S, WSM G GENERAL
NOTE
■
• The following special tools are not provided, so make them referring to the figure.
Idle Gear Bushing Replacing Tool
Application: Use to press out and to press fit the bushing.
1. For idle gear bushing
W10440400
Gear Case Oil Seal Replacing Tool
Application: Use to press fit the oil seal.
W1041529
A 196 mm (7.72 in.)
B 37.5 mm (1.48 in.)
C 150 mm (5.91 in.)
D 44.95 mm dia. (1.770 in. dia.)
E 48.075 to 48.100 mm dia. (1.8928 to 1.8937 in. dia.)
F 20 mm dia. (0.79 in. dia.)
a 6.3
μ
m (250
μ
in.)
b 6.3
μ
m (250
μ
in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
A 148.8 mm (5.858 in.)
B 50 mm (2.0 in.)
C 18.8 mm (0.740 in.)
D 13.7 to 13.9 mm (0.540 to 0.547 in.)
E 11 mm (0.43 in.)
F 18 mm dia. (0.71 in. dia.)
G 38 mm dia. (1.5 in. dia.)
H 45 mm dia. (1.8 in. dia.)
I 57.90 to 58.10 mm dia. (2.280 to 2.287 in. dia.)
J 79.5 mm dia. (3.13 in. dia.)
K 87 mm dia. (3.4 in. dia.)
L 12 mm (0.47 in.)
M 40 mm (1.6 in.)
N 120 mm (4.72 in.)
KiSC issued 06, 2007 A