Kubota M108S, Workshop Manual

Page: 45 / 523

G-28
M108S, WSM G GENERAL
Cleaning Fresh Air Filter
1. Remove the knob bolts (3) and pull out filter (1).
NOTE
■
• Do not hit the filter. If the filter becomes deformed, dust may
enter into the air-conditioner, which may cause damage and
malfunction.
• Do not use gasoline, thinner or similar chemicals to clean
the filter as damage to the filter may occur.
• It may also cause an unpleasant odor in the cabin when the
system is used next.
■
Cleaning the air filter
• Normal use
Blow air from the opposite direction to the filter’s normal air flow.
Pressure of compressed air must be under 210 kPa (2.1 kgf/cm
2
,
30 psi)
• If the filter is very dirty
Dip the filter in lukewarm water with mild dish washing detergent.
Move it up and down as well as left and right to loosen dirt. Rinse
the filter with clean water and let it air-dry.
IMPORTANT
■
• Do not hit the filter. If the filter becomes deformed, dust may
enter into the air-conditioner, which may cause damage and
malfunction.
• Do not use gasoline, thinner or similar chemicals to clean
the filter as damage to the filter may occur.
• If may also cause an unpleasant odor in the cabin when the
system is used next.
W1048208
Cleaning Air Conditioner Condenser
1. Check the air conditioner condenser (1).
2. If dust and dirt, wash off all dirt and dust from the condenser (1)
with a soft brush, use care not to damage or bend the fins.
W1048552
(1) Fresh Air Filter
(2) Cover
(3) Knob Bolt A : Air Inner Port
B : Air Conditioner Airflow
(1) Air Conditioner Condenser
KiSC issued 06, 2007 A