Kubota M108S, Workshop Manual

Page: 68 / 523

G-51
M108S, WSM G GENERAL
7) Piece 3
W1048484
Injection Pump Gear Puller
Application: Use for remove the injection pump gear from governor
shaft.
W1042094
A 26 mm (1.0 in.)
B 18 mm (0.71 in.)
C 16.5 to 17.0 mm (0.650 to 0.669 in.)
D 1.5 mm (0.059 in.)
E 53.00 to 53.20 mm dia. (2.087 to 2.094 in dia.)
F 49.55 to 49.75 mm dia. (1.951 to 1.958 in dia.)
G 16 mm (0.63 in.)
H Chamfer 1.0 mm (0.039 in.)
I 8.5 mm dia. (0.33 in. dia.)
J 0.4 mm (0.02 in.)
K 3.0 mm (0.12 in.)
L 19 mm (0.75 in.)
M Chamfer 0.5 mm (0.02 in.)
N 36 mm (1.4 in.)
O 45 mm dia. (1.8 in. dia.)
P 0.78 rad (45
°
)
Q 11.5 mm (0.453 in.)
A 10 mm dia. (0.39 in.dia.)
B M16
×
Pitch 1.5
C 19 mm (0.75 in.)
D 0.5 mm radius (0.02 in. radius)
E 0.87 rad (50
°
)
F 10 mm (0.39 in.)
G 20 mm (0.79 in.)
H 5.0 mm (0.20 in.)
I 95 mm (3.7 in.)
J 125 mm (4.92 in.)
K 5.0 mm (0.20 in.)
L M16
×
Pitch 1.5
M 30 mm (1.2 in.)
N 9.5 mm (0.37 in.)
O 11 mm (0.43 in.)
P 9.5 mm (0.37 in.)
Q 14.5 mm (0.571 in.)
R 5.5 mm radius (0.22 in. radius)
S 20 mm (0.79 in.)
T 20 mm (0.79 in.)
U 80 mm (3.1 in.)
W 12 mm (0.47 in.)
C2 Chamfer 2.0 mm (0.079 in.)
KiSC issued 06, 2007 A