Krone Big Pack 127 / MultiCut, Operating Manual, Page: 96 / 132

XII - 4
Special Equipment
Switching blade control shaft off
mechanically
12.1.5 Blade stop
The blade control shaft (2) can be brought into the zero
position using a hydraulic cylinder (1).
Switching blade control shaft off
hydraulically
The hydraulic cylinder is operated from the tractor. The
zero position is indicated on the comfort control.
The hydraulic blade stop is used,
amongst other things, to eliminate any
blockages.
After a prolonged operation of the
hydraulic zero blade setting it may
happen that the blades slowly return into
the channel (this can be caused by an oil
leakage of the tractor). It is therefore
recommended to switch off the blade
control shaft mechanically.
Die hydraulische Messernullschaltung
nicht bei mechanisch ausgeschalteter
Messerschaltwelle betätigen.
Unlock the locking lever (3).
Die Messerschaltwelle (2) mit dem Spezialschlüssel in
eine Zwischenposition drehen.
If the Big Pack MultiCut is to be operated
for a long time without a cutting system,
we recommend removing the blades.
(see Chapter 12.1.4)
1
2
3
BP380-7-111
BP380-7-112