Krone Big Pack 127 / MultiCut, Operating Manual, Page: 30 / 132

III - 8
Preparing the Big Pack Baler
Before sliding the PTO shaft on to the tractor PTO shaft, always secure with the mechanical or
hydraulic holding brake.
PTO Shaft
To fix the flywheel turn the brake lever (1) on the left
hand side of the swinging drawbar from position
(b) to
position (a) . The flywheel is now braked.
• After mounting, ensure that the PTO
shaft has locked into place.
• Only use the PTO shaft supplied
from the factory.
Installing the PTO shaft
On the machine
• see ch. 3.3
On the tractor
• Remove the PTO shaft from the retaining chain (1)
or support (fold in!)
• Slide the PTO shaft on the tractor PTO shaft with
the engine shut off and the ignition key removed and
then secure.
• Secure PTO shaft guard against turning as well by
hanging up the safety chain (3).
b
a
1
BP380-7-019
1
3 2
BP380-7-020