Krone Big Pack 127 / MultiCut, Operating Manual, Page: 37 / 132

IV - 1
Comfort Controls
4. Comfort Controls
4.1 Special Notes on Safety
• Switch off the engine when carrying out assembly work on the tractor or the big pack baler.
Remove the ignition key. Apply the flywheel brake.
• Secure the tractor and the big pack baler from rolling away.
• When mounting the control and indicator box on the tractor make sure that the connection
cable to the big pack baler is not under tension and does not come into contact with the
tractor wheels.
4.2 General Description
The electronic unit for the Big Pack essentially consists
of the on-board computer, the control box and the
control and function elements. The control box (2)
provides the driver with information and makes
adjustments for the operation of the big pack baler
using information gathered and processed by the on-
board computer.
The On-Board Computer
The on-board computer (1) is located on the right hand
side of the big pack baler behind the protective plate.
Disconnect the power supply to the electronic comfort controls when carrying out assembly and
repair work, especially when welding on the big pack baler. Over-voltage can damage the com-
fort controls electronics.
The following functions are monitored, regulated and
carried out by the on-board computer:
• Regulation of the baling thrust
• Bale counter
• Control of knotter cleaning
• Transmission of alarm messages
• Provision of requested information
Protect the on-board computer against moisture.
Do not use HP cleaning device, especially when cleaning the housing and the connectors.
BP-VFS-008
1
2
5 6 8 7 9
#
0
4 3
1 2
I
O
_
Prog
+
Quit
P
max
BP-VFS-009