Krone Big Pack 127 / MultiCut, Operating Manual, Page: 57 / 132

VI - 3
Settings
6.2.4 Needles in Idle Position
If the needle yoke is in the idle position, i.e. the crank
arm (1) and the needle drive connecting rod (2) are ex-
tended, there must be a distance
„c“ = 0 - 20 mm
between the cross tube of needle yoke (4) and brake
(3).
Check the position of the needle yoke brake:
Any wrong adjustment can be corrected by shortening
or lengthening the needle drive connecting rod. For this
see section 6.2.3.
Type Position
BP 88 / 128 Single knotter
BP 88 / 128 Double knotter
BP 127
Single knotter
BP 127 Double knotter
A
B
C
D
BP-VFS-081
4
2
1
3
c
A B C
3
D