Krone Big Pack 127 / MultiCut, Operating Manual, Page: 32 / 132

III - 10
Preparing the Big Pack Baler
1
BP-VFS-005
When the pack chute (2) is folded up, it should be
secured in the brackets (3) with the retaining chains (1).
Pack Chute
The pack chute is divided into front (3) and rear (1)
parts. To put the pack chute in the transport position,
the lock (2) on the rear part must be actuated. Fold in
the rear part and lift it together with the front part to just
in front of the bale channel and secure with the
retaining chains (4).
Pick Up
Raise the pick up and secure it from lowering with the
shut-off tap (1). The lever located on the front right hand
side of the machine must be turned from position (a) to
position (b).
3.4.4 Road Journeys
• Driving on public highways is only permitted with the bale channel empty and the pack
chute folded in.
• The maximum speed is 40 km/h.
• Carrying passengers on the big pack baler is not permitted.
• The big pack baler's roadworthiness must be checked and guaranteed, especially the
lighting, the protective plates and twine box flaps must be locked, and the pick up must be
raised and secured.
• Before setting off, ensure that you have perfect visibility on and around the tractor and the
big pack baler.
On machines with wide pick-up (optional
equipment) the gauge wheels must be
moved to transport position and secured
(see section 11.5)
BP380-7-025
4
3
2
1
BP380-7-026
1
3
2