Krone Big Pack 127 / MultiCut, Operating Manual, Page: 87 / 132

IX - 3
Knotter
BP 380-7-094
2
1
BP 380-7-093
3 1
a
2
The stripping comb on the blade lever (2) must touch
the rear of the knotter hook (3) lightly but uniformly. The
distance between the stripping comb on the blade lever
(2) and the tip of the knotter hook (1) should be
"a" = 15 to 18 mm in the blade lever dead centre.
The blade lever has reached the dead centre when the
blade lever roller (1) (Fig. BP 380-0-055) is on the
highest point on the cam (1) (Fig. BP 380-0-058, on
following page) in the knotter disc (2)
(Fig. BP 380-0-058, on the following page).