Krone Big Pack 127 / MultiCut, Operating Manual, Page: 40 / 132

IV - 4
Comfort Controls
All buttons located below the display have an indicator
light in the top right hand corner. The indicator light
indicates the operating status of the button (this is not
the case for button
8
, where the operating status
of the cutter mechanism is indicated):
indicator light illuminated: operating
indicator not illuminated: not operating
4.5 Ready Status
• Switch on control box at the main switch (14).
• Actuate key
A brief self-test follows if the power supply is properly
connected.
– The control box indicator lights light up briefly.
– Horn sounds briefly.
– The display (13) indicates the terminal version
number.
then
The display (13) indicates the machine version –
number.
If the self-test is not performed, check
the power supply.
If the self-test (duration 10 sec.) has been performed
successfully, the comfort controls are operative and
change into the operating mode.
Operating mode:
- In the display (13) the preselected density force
appears.
#
1 2 9 0
3 4
BP-VFS-070
---- K R O N E -----
Komfortelektronik -
- T E R M I N A L --
Version Nr..: x.x --
13
Prog Quit
5 6 8 7
P
max
Prog Quit
#
1 2 9 0
3 4
BP-VFS-071
---- K R O N E -----
Komfortelektronik -
- B I G - P A C K --
Version Nr..: x.x --
13
5 6 8 7
P
max
Prog Quit
#
1 2 9 0
3 4
BP-VFS-072
a
90 90
5 6 8 7
P
max