Krone Big Pack 127 / MultiCut, Operating Manual, Page: 101 / 132

XII - 9
Special Equipment
12.4 Hydraulic folding bale chute with rollers
Secure the vehicle and machine against rolling away.
Keep people clear of the danger zone when folding the bale chute in and out.
Only drive on public roads if the bale chute has been folded in.
A hydraulic folding bale chute (4) with seven rollers (3)
is available for the Big Pack as an optional extra.
Operation of the residual bale ejector from the rear
right-hand side of the machine is also part of this
option.
The bale chute is held in working position by retaining
chains (2). In ausgeklappter Stellung sind das vordere
und hintere Schurrenteil miteinander verriegelt. The
bale chute can be set using the adjust-ing screws (1) so
that it is at the same level as the baling channel floor.
Anderenfalls arbeitet die Verriegelung nicht ordnungs-
gemäß.
The hydraulic line control unit on the tractor must be set
to lift so the bale chute and the residual bale ejector can
be operated.
The control unit (3) for the hydraulic folding bale chute
and the residual bale ejector is between the mainten-
ance platform (2) and the wheel chock (1) on the right-
hand side of the machine.
BP380-7-124
BP380-7-125