70
K-CONFIG - Defining the Control Room via the Project Navigator
Figure 113: Set Automatic Behavior – Port Manager Example
4.
Once the drivers are assigned you can close the Port Manager window.
The Project Navigator now lists the assigned ports.
Figure 114: Set Automatic Behavior – RC-13TC with Assigned Ports
5.
Right-click the RC-13TC line in the Project Navigator and select Set Automatic Behavior.
The following window appears:
Figure 115: Set Automatic Behavior – Device Transport Commands Wizard Window
6.
Click OK.
When setting the Keypad Events Trigger (see
Section 8.2
) the triggers and actions related to the assigned drivers
appear automatically with regard to the buttons on the
RC-13TC
.
