K-CONFIG –
The Driver Manager – Getting Started
53
If you are creating a controlled device specific command, select
IR
>
Device-Specific
and click
+
to add a
command. The following window appears:
Type the new command’s name and click
OK
.
The new command is added to the Device-Specific list.
3.
Click the
Read Command
or the
Connect
button.
The
Connection Method
window appears.
If you choose to click the connect button, once connected you will have to click the Read Command button.
Figure 85: IR Commands - Connect to the Room Controller Device
4.
Click Connect.
5.
Click the Read Command button.
The following window appears.
6.
Click OK.
After clicking this button, you have a 1 minute period to point the remote control to the IR learner sensor to let
it capture the command.
