K-CONFIG –
The Driver Manager – Getting Started
51
Figure 81: Testing Serial Commands – Serial Reply Stored
If the response matches the current Serial Reply, you will get the Reply Stored Message. Click OK.
Figure 82: Testing Serial Commands – Serial Reply Matches Stored Reply
5.5.2
Creating an IR Command
Open the IR command list and select a command. You can add an IR command by:
•
Typing in the command syntax (see
Section 5.5.1
).
•
Adding a controlled device’s pronto IR code and converting it to the regular syntax.
•
Reading the IR command via IR Learning as described in this section.
Converting the Pronto IR Codes
Controlled devices which do not have Pronto IR codes require that you convert them before they can be used in
K-CONFIG
.
In the following example, to convert the PWR_ON IR code of a Sony Projector
:
1.
Select the required command (PWR_ON), click the
Convert from Pronto
button.
The CONVERT PRONTO COMMAND window appears.
