
112
K-CONFIG - Using the Triggers
Activate on Release
: activates the
trigger upon button release.
Press-Release
: activates a trigger
(Press) all the while the button is
pressed and another trigger (Release)
when the button is released.
Activate while Pressed
: the trigger is
activated again and again as long as the
button is pressed. You can set the
trigger delay time (
Start After
…), as
well as the repetition delay time (
Repeat
Every
…).
Note that time is set in 1/10th of a
second intervals.
Toggle 1-2-3-4
: select the number of toggle states (from
2 to 10). With each press of the button, the next toggle
state is activated (upon completion of that toggle). When
in the last toggle state, the next press of the button will
activate the first toggle state once again.
We recommend that you assign a different button color
command to each trigger state so that you can identify
each toggle state by the associated color of the button.
For example, the toggle button could be set to have two
states and used as an on/off switch. The first press of the
button will trigger an “On” action list. The next press on
the same button will trigger the “Off” action list.
Note that not all room controllers can have up to 10
toggle states, some have less.