K-CONFIG –
Connecting to the Device
153
To set the K-NET ID to an auxiliary device
:
1.
Right click the required auxiliary device in the
Project Navigator
area and select
Set K-NET ID
.
The following window appears:
Figure 284: KNET ID – Connect the Device Directly to PC
2.
Connect the auxiliary device (
SL-10
) directly to the PC (via USB) and then click
OK
.
If you are connecting the device via USB for the first time, you might need to define the USB port. To
do this, follow the instructions in
Section 3.2
The
Connection Method
window appears:
You might need to click
Refresh Ports
to have the USB port appear.
Figure 285: KNET ID – The K-NET ID Connect Window
3.
Click
Connect
.
The
Setting K-NET™ ID
window appears.
Figure 286: KNET ID – Setting K-NET ID
4.
Click
OK
to set the ID number.
Figure 287: KNET ID –K-NET ID assigned
