K-CONFIG –
Using the Triggers
129
3.
Click OK and add actions to the trigger (see
Section 9
):
Figure 249: Sub Routines – Set the Action Group Trigger Name
In this example, the subroutine includes power down of the input sources and it can be incorporated into daily
and/or weekly shutdown triggers, GPI/O events (temperature alarm, for example), and so on. This sequence of
commands will not have to be written again and again for specific triggers and can be used as a sub routine
within a trigger as required.
4.
Open or create an Event Trigger (for example, one of the built-in Custom Events, All Off).
5.
In the Action Editor select Sub Routines and add the Sub Routine see
Figure 250: Sub Routines – Selecting the Sub Routine Action Group Trigger in the Action Editor
