Korenix JetNet 5228G Series, User Manual

Page: 327 / 658

System Management Commands
4-17
4
banner configure
This command is used to interactively specify administrative information for this
device.
Syntax
banner configure
Default Setting
None
Command Mode
Global Configuration
Command Usage
The administrator can batch-input all details for the switch with one command.
When the administrator finishes typing the company name and presses the
enter key, the script prompts for the next piece of information, and so on, until
all information has been entered. Pressing enter without inputting information
at any prompt during the script’s operation will leave the field empty. Spaces
can be used during script mode because pressing the enter key signifies the
end of data input. The delete and left-arrow keys terminate the script. Use of
the backspace key during script mode is not supported. If, for example, a
mistake is made in the company name, it can be corrected with the
banner
configure company command.
banner configure
equipment-info Configures Equipment information displayed by the banner GC 4-20
banner configure
equipment-location Configures Equipment Location information displayed by the
banner GC 4-21
banner configure
ip-lan Configures IP and LAN information displayed by the banner GC 4-21
banner configure
lp-number Configures LP Number information displayed by the banner GC 4-22
banner configure
manager-info Configures Manager contact information displayed by the
banner GC 4-23
banner configure
mux Configures MUX information displayed by the banner GC 4-23
banner configure
note Configures miscellaneous information displayed by the banner
under the Notes heading GC 4-24
show banner Displays all banner information NE, PE 4-25
Table 4-8 Banner Commands
(Continued)
Command Function Mode Page