Korenix JetNet 5228G Series, User Manual

Page: 173 / 658

Port Configuration
3-127
3
Command Attributes
• Member List ( Current ) – Shows configured trunks (Port).
• New – Includes entry fields for creating new trunks.
- Port – Port identifier. (Range: 1-28)
Web – Click Port, LACP, Configuration. Select any of the switch ports from the
scroll-down port list and click Add. After you have completed adding ports to the
member list, click Apply.
Figure 3-76 LACP Trunk Configuration
CLI – The following example enables LACP for ports 1 to 6. Just connect these ports
to LACP-enabled trunk ports on another switch to form a trunk.
Console(config)#interface ethernet 1/1 4-172
Console(config-if)#lacp 4-186
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/6
Console(config-if)#lacp
Console(config-if)#end
Console#show interfaces status port-channel 1
4-180
Information of Trunk 1
Basic Information:
Port Type: 100TX
Mac Address: 00-12-CF-12-34-89
Configuration:
Name:
Port Admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full
Flow Control Status: Disabled
Port Security: Disabled
Max MAC Count: 0
Current status:
Created by: Lacp
Link Status: Up
Port Operation Status: Up
Operation Speed-duplex: 100full
Flow Control type: None
Member Ports: Eth1/1, Eth1/2, Eth1/3, Eth1/4, Eth1/5, Eth1/6,
Console#