
Configuring the Switch
3-216
3
Command Attributes
•
Default Priority
14
– The priority that is assigned to untagged frames received on
the specified interface. (Range: 0-7; Default: 0)
•
Number of Egress Traffic Classes
– The number of queue buffers provided for
each port.
Web
– Click Priority, Default Port Priority or Default Trunk Priority. Modify the default
priority for any interface, then click Apply.
Figure 3-121 Port Priority Configuration
CLI
– This example assigns a default priority of 5 to port 3.
14. CLI displays this information as “Priority for untagged traffic.”
Console(config)#interface ethernet 1/3
4-172
Console(config-if)#switchport priority default 5
4-278
Console(config-if)#end
Console#show interfaces switchport ethernet 1/3
4-182
Information of Eth 1/3
Broadcast Threshold: Enabled, scale:1000K level:5 octets/second
LACP Status: Disabled
Ingress Rate Limit: Disabled, scale:10M level:1
Egress Rate Limit: Disabled, scale:10M level:1
VLAN Membership Mode: Hybrid
Ingress Rule: Enabled
Acceptable Frame Type: All frames
Native VLAN: 1
Priority for Untagged Traffic: 5
GVRP Status: Disabled
Allowed VLAN: 1(u),4093(t),
Forbidden VLAN:
Private-VLAN Mode: NONE
Private-VLAN host-association: NONE
Private-VLAN Mapping: NONE
802.1Q-tunnel Status: Disable
802.1Q-tunnel Mode: NORMAL
802.1Q-tunnel TPID: 8100(Hex)
Console#
Summary of Contents for JetNet 5228G Series
