Korenix JetNet 5228G Series, User Manual

Page: 210 / 658

Configuring the Switch
3-164
3
CLI – This example sets the priority for MSTI 1, and adds VLAN 1 to this MSTI. It
then displays the STA settings for instance 1, followed by settings for each port.
Console(config)#spanning-tree mst configuration 4-207
Console(config-mst)#mst 1 priority 4096 4-208
Console(config-mstp)#mst 1 vlan 1 4-208
Console(config-mst)#end
Console#show spanning-tree mst 1
4-218
Spanning-tree information
---------------------------------------------------------------
Spanning Tree Mode: MSTP
Spanning Tree Enabled/Disabled: Enabled
Instance: 1
VLANs Configuration: 1
Priority: 4096
Bridge Hello Time (sec.): 2
Bridge Max Age (sec.): 20
Bridge Forward Delay (sec.): 15
Root Hello Time (sec.): 2
Root Max Age (sec.): 20
Root Forward Delay (sec.): 15
Max Hops: 20
Remaining Hops: 20
Designated Root: 4096.1.0012CF7D25BC
Current Root Port: 0
Current Root Cost: 0
Number of Topology Changes: 0
Last Topology Change Time (sec.): 452
Transmission Limit: 3
Path Cost Method: Long
---------------------------------------------------------------
Eth 1/ 7 information
---------------------------------------------------------------
Admin Status: Enabled
Role: Designate
State: Forwarding
External Admin Path Cost: 100000
Internal Admin Path Cost: 100000
External Oper Path Cost: 100000
Internal Oper Path Cost: 100000
Priority: 128
Designated Cost: 0
Designated Port: 128.1
Designated Root: 4096.1.0012CF7D25BC
Designated Bridge: 4096.1.0012CF7D25BC
Fast Forwarding: Enabled
Forward Transitions: 2
Admin Edge Port: Enabled
Oper Edge Port: Enabled
Admin Link Type: Auto
Oper Link Type: Point-to-point
Spanning Tree Status: Enabled
.
.
.