Korenix JetNet 5228G Series, User Manual

Page: 493 / 658

Interface Commands
4-183
4
Example
This example shows the configuration setting for port 2.
Console#show interfaces switchport ethernet 1/2
Information of Eth 1/2
Broadcast Threshold: Enabled, scale:1000K level:5 octets/second
LACP Status: Disabled
Ingress Rate Limit: Disabled, scale:10M level:1
Egress Rate Limit: Disabled, scale:10M level:1
VLAN Membership Mode: Hybrid
Ingress Rule: Enabled
Acceptable Frame Type: All frames
Native VLAN: 1
Priority for Untagged Traffic: 0
GVRP Status: Disabled
Allowed VLAN: 1(u),4093(t),
Forbidden VLAN:
Private-VLAN Mode: NONE
Private-VLAN host-association: NONE
Private-VLAN Mapping: NONE
802.1Q-tunnel Status: Disable
802.1Q-tunnel Mode: NORMAL
802.1Q-tunnel TPID: 8100(Hex)
Console#
Table 4-53 Interfaces Switchport Statistics
Field Description
Broadcast Threshold Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-178).
LACP Status Shows if Link Aggregation Control Protocol has been enabled or disabled
(page 4-186).
Ingress Rate Limit Shows if ingress rate limiting is enabled, and the current rate limit. (page 4-196).
Egress Rate Limit Shows if egress rate limiting is enabled, and the current rate limit. (page 4-196).
VLAN Membership Mode Indicates membership mode as Trunk or Hybrid (page 4-228).
Ingress Rule Shows if ingress filtering is enabled or disabled (page 4-229).
Note: Ingress filtering is always enabled.
Acceptable Frame Type Shows if acceptable VLAN frames include all types or tagged frames only
(page 4-228).
Native VLAN Indicates the default Port VLAN ID (page 4-230).
Priority for Untagged
Traffic Indicates the default priority for untagged frames (page 4-276).
GVRP Status Shows if GARP VLAN Registration Protocol is enabled or disabled (page 4-222).
Allowed VLAN Shows the VLANs this interface has joined, where “(u)” indicates untagged and
“(t)” indicates tagged (page 4-231).
Forbidden VLAN Shows the VLANs this interface can not dynamically join via GVRP (page 4-232).
Private VLAN Mode Shows the private VLAN mode as host, promiscuous, or none (page 4-240).
Private VLAN
Host-association Shows the secondary (or community) VLAN with which this port is associated
(page 4-241).
Private VLAN Mapping Shows the primary VLAN mapping for a promiscuous port (page 4-242).