Korenix JetNet 5228G Series, User Manual

Page: 452 / 658

Command Line Interface
4-142
4
web-auth session-timeout
This command defines the amount of time a web-authentication session remains
valid. When the session-timeout has been reached, the host is logged off and must
be re-authenticated the next time data is transmitted. Use the
no form to restore the
default.
Syntax
web-auth session-timeout timeout
no web-auth session timeout
timeout - The amount of time that an authenticated session remains valid.
(Range: 300-3600 seconds)
Default Setting
3600 seconds
Command Mode
Global Configuration
Example
web-auth system-auth-control
This command globally enables web authentication for the switch. Use the no form
to restore the default.
Syntax
[ no ] web-auth system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
Both web-auth system-auth-control for the switch and web-auth for an
interface must be enabled for web authentication to be active.
Example
Console(config)#web-auth session-timeout 1800
Console(config)#
Console(config)#web-auth system-auth-control
Console(config)#