Korenix JetNet 5228G Series, User Manual

Page: 307 / 658

Switch Clustering
3-261
3
CLI – This example first enables clustering on the switch, sets the switch as the
cluster Commander, and then configures the cluster IP pool.
Configuring Cluster Members
Adds Candidate switches to the cluster as Members.
Command Attributes
• Member ID – Specify a Member ID number for the selected Candidate switch.
(Range: 1-36)
• MAC Address – Select a discoverd switch MAC address from the Candidate
Table, or enter a specific MAC address of a known switch.
Web – Click Cluster, Member Configuration.
Figure 3-154 Cluster Member Configuration
Console(config)#cluster 4-64
Console(config)#cluster commander 4-64
Console(config)#cluster ip-pool 10.2.3.4 4-65
Console(config)#end
Console#show cluster
4-67
Role: commander
Interval heartbeat: 30
Heartbeat loss count: 3
Number of Members: 0
Number of Candidates: 0
Console#