Korenix JetNet 5228G Series, User Manual

Page: 402 / 658

Command Line Interface
4-92
4
show radius-server
This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Privileged Exec
Example
Client
Terminal Access Controller Access Control System () is a logon
authentication protocol that uses software running on a central server to control
access to TACACS-aware devices on the network. An authentication server
contains a database of multiple user name/password pairs with associated privilege
levels for each user or group that require management access to a switch.
Console#show radius-server
Global Settings:
Communication Key with RADIUS Server:
Auth-Port: 1812
Acct-port: 1813
Retransmit Times: 2
Request Timeout: 5
Server 1:
Server IP Address: 10.1.2.3
Communication Key with RADIUS Server: ******
Auth-Port: 1812
Acct-port: 1813
Retransmit Times: 2
Request Timeout: 5
Radius server group:
Group Name Member Index
--------------------- -------------
radius 1
Console#
Table 4-31 Commands
Command Function Mode Page
tacacs-server host Specifies the server GC 4-93
tacacs-server port Specifies the server network port GC 4-93
tacacs-server key Sets the encryption key GC 4-94
tacacs-server retransmit Sets the number of retries GC 4-94
tacacs-server timeout Sets the interval before resending an authentication request GC 4-95
show tacacs-server Shows the current settings GC 4-96