Korenix JetNet 5228G Series, User Manual

Page: 164 / 658

Configuring the Switch
3-118
3
- If there is an entry with the same VLAN ID and MAC address, and the type of the
entry is dynamic DHCP snooping binding, then the new entry will replace the old
one and the entry type will be changed to static IP source guard binding.
Command Attributes
• Static Binding Table Counts – The total number of static entries in the table.
• Port – Switch port number. (Range: 1-28)
• VLAN ID – ID of a configured VLAN (Range: 1-4094)
• MAC Address – A valid unicast MAC address.
• IP Address – A valid unicast IP address, including classful types A, B or C.
Web – Click IP Source Guard, Static Configuration. Select the VLAN and port to
which the entry will be bound, enter the MAC address and associated IP address,
then click Add.
Figure 3-71 Static IP Source Guard Binding Configuration
CLI – This example shows how to configure a static source-guard binding on port 5.
Console(config)#ip source-guard binding 11-22-33-44-55-66 vlan 1
192.168.0.99 interface ethernet 1/5 4-156
Console(config)#