Korenix JetNet 5228G Series, User Manual

Page: 264 / 658

Configuring the Switch
3-218
3
Web – Click Priority, Traffic Classes. The current mapping of CoS values to output
queues is displayed. Assign priorities to the traffic classes (i.e., output queues),
then click Apply.
Figure 3-122 Traffic Classes
CLI – The following example shows how to change the CoS assignments.
Console(config)#interface ethernet 1/1 4-172
Console(config-if)#queue cos-map 0 0 4-279
Console(config-if)#queue cos-map 1 1
Console(config-if)#queue cos-map 2 2
Console(config-if)#end
Console#show queue cos-map ethernet 1/1
4-281
Information of Eth 1/1
CoS Value: 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 1 2 2 3 3
Console#