Korenix JetNet 5228G Series, User Manual

Page: 212 / 658

Configuring the Switch
3-166
3
CLI – This displays STA settings for instance 0, followed by settings for each port.
The settings for instance 0 are global settings that apply to the IST, the settings for
other instances only apply to the local spanning tree.
Console#show spanning-tree mst 0 4-218
Spanning Tree Information
---------------------------------------------------------------
Spanning Tree Mode: MSTP
Spanning Tree Enabled/Disabled: Enabled
Instance: 0
VLANs Configuration: 2-4094
Priority: 32768
Bridge Hello Time (sec.): 2
Bridge Max Age (sec.): 20
Bridge Forward Delay (sec.): 15
Root Hello Time (sec.): 2
Root Max Age (sec.): 20
Root Forward Delay (sec.): 15
Max Hops: 20
Remaining Hops: 20
Designated Root: 32768.0.0012CF7D25BC
Current Root Port: 0
Current Root Cost: 0
Number of Topology Changes: 0
Last Topology Change Time (sec.): 21888
Transmission Limit: 3
Path Cost Method: Long
---------------------------------------------------------------
Eth 1/ 1 Information
---------------------------------------------------------------
Admin Status: Enabled
Role: Designate
State: Forwarding
External Admin Path Cost: 100000
Internal Admin Path Cost: 100000
External Oper Path Cost: 100000
Internal Oper Path Cost: 100000
Priority: 128
Designated Cost: 0
Designated Port: 128.1
Designated Root: 32768.0.0012CF7D25BC
Designated Bridge: 32768.0.0012CF7D25BC
Fast Forwarding: Enabled
Forward Transitions: 5
Admin Edge Port: Enabled
Oper Edge Port: Enabled
Admin Link Type: Auto
Oper Link Type: Point-to-point
Spanning Tree Status: Enabled
.
.
.