Korenix JetNet 5228G Series, User Manual

Page: 326 / 658

Command Line Interface
4-16
4
Device Designation Commands
hostname
This command specifies or modifies the host name for this device. Use the no form
to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Banner Information Commands
These commands are used to configure and manage administrative information
about the switch, its exact data center location, details of the electrical and network
circuits that supply the switch, as well as contact information for the network
administrator and system manager. This information is only available via the CLI and
is automatically displayed before login as soon as a console or telnet connection has
been established.
Table 4-7 Device Designation Commands
Command Function Mode Page
hostname Specifies the host name for the switch GC 4-16
snmp-server contact Sets the system contact string GC 4-71
snmp-server location Sets the system location string GC 4-72
Console(config)#hostname RD#1
Console(config)#
Table 4-8 Banner Commands
Command Function Mode Page
banner configure Configures banner information displayed before login GC 4-17
banner configure
company Configures Company information displayed by the banner GC 4-18
banner configure
dc-power-info Configures DC Power information displayed by the banner GC 4-19
banner configure
department Configures Department information displayed by the banner GC 4-19