Konica Minolta bizhub C35, Service Manual

Page: 251 / 330

DRAFT
14. MALFUNCTION CODE Field Service V er. 1.0 Feb. 2010
212
14.4.10 0096: 1st image transfer pressure/retraction failure
14.4.11 0300: Polygon motor malfunction
Relevant electrical parts
1st transfer release sensor (PS17)
1st transfer release solenoid (SD1)
Main motor (M2) Printer control board (PRCB)
Step Action
WIRING DIAGRAM
Control signal
Location (electri-
cal component)
1 Check the connector between M2-PRCB
PJ6 for proper connection and correct as
necessary. - -
2 Check the M2 connector for proper drive
coupling and correct as necessary. - -
3 Check the connector between PS17-PRCB
PJ26 for proper connection and correct as
necessary. - -
4 Check the connector between SD1-relay
CN25-PRCB PJ14 for proper connection
and correct as necessary. - -
5 PS17 sensor check PRCB PJ26-7 (ON) G-7
6 SD1 operation check PRCB PJ14-11 (REM) H-15
7 M2 operation check PRCB PJ6-3 to 6 C-15
8 Change PS17. - -
9 Change SD1. - -
10 Change M2. - -
11 Change PRCB. - -
Relevant electrical parts
PH unit Printer control board (PRCB)
Step Action
WIRING DIAGRAM
Control signal
Location (electri-
cal component)
1 Check the connector between PH unit-
PRCB PJ19 for proper connection and cor-
rect as necessary. - -
2 Change PH unit. - -
3 Change PRCB. - -