Konica Minolta bizhub C35, Service Manual

Page: 219 / 330

DRAFT
11. FAX PROTOCOLS Field Service V er. 1.0 Feb. 2010
180
ADJUSTMENT
/
SETTING
11.3 Table of reference code
Code Function
CFR Confirmation to Receive. 1850 Hz or 1650 Hz 3 sec.
CIG Calling Station Identification.
CRP Command Repeat.
CSI Called Subscriber Identification.
DCN Disconnect.
DCS Digital Identification Signal.
DIS Digital Transmit Command.
DTC Digital Transmit Command.
EOM End of Message. 1,100 Hz.
EOP End of Procedure.
FTT Failure to Train.
MCF Message Confirmation. 1,650 Hz or 1,850 Hz.
MPS Multi-Page Signal.
NCS Non-Standard Facilities Command.
NCF Non-Standard Facilities.
NSS Non-Standard Facilities Set-up.
PIN Procedural Interrupt Negative.
PIP Procedural Interrupt Positive.
PRI-EOM Procedure Interrupt-End of Message (COM).
PRI-MPS Procedure Interrupt-Multi Page Signal (MPS).
PRI-EOP Procedure Interrupt-End of Procedure (EOP).
RTN Retrain Negative.
RTP Retrain Positive.
TSI Transmitting Station Identification.