Konica Minolta bizhub C35, Service Manual

Page: 198 / 330

DRAFT
Field Service V er. 1.0 Feb. 2010 10. SER V ICE MODE
159
bizhub C35
ADJUSTMENT
/ SETTING
10.10.2 Consumable Replace-Transfer Roller Unit
A. Use
• Resets the transfer roller unit counter.
• To use when the transfer roller unit has been replaced.
B. Procedure
1. Call the Service Mode to the display.
2. Touch [Supplies]
→
[Consumable Replace]
→
[Transfer Roller Unit].
3. Select [Yes], and touch [OK].
10.10.3 Consumable Replace-Fusing Unit
A. Use
• Resets the fuser unit counter.
• To use when the fuser unit has been replaced.
B. Procedure
1. Call the Service Mode to the display.
2. Touch [Supplies]
→
[Consumable Replace]
→
[Fusing Unit].
3. Select [Yes], and touch [OK].
10.11 BK Clear
A. Use
• To clear engine information backup data.
• Use when the engine information backup data is cleared.
• Use when the MFP board is replaced.
Yes: Executes data clear
No: Does not execute data clear
B. Procedure
• The default setting is No.
Yes “No”
10.12 Firmware Update
10.12.1 Details
A. Use
• To display the firmware information stored in the USB memory device.
• The following information is displayed:
Model name (bizhub C35) of firmware data
V ersion information of firmware data
B. Procedure
1. Set the USB memory device.
2. Call the Service Mode to the display.
3. Touch [Firmware Update].
4. Select the firmware to be updated and touch [Details].
NOTE
• An error message appears if the selected data is not of the appropriate data for-
mat.