Konica Minolta bizhub C35, Service Manual

Page: 215 / 330

DRAFT
10. SER V ICE MODE Field Service V er. 1.0 Feb. 2010
176
ADJUSTMENT
/
SETTING
C. Scanner sensor check list
10.20 Toner Out Mode
A. Use
• Sets whether or not to enable monochrome print when the toner cartridge/Y,M,C
becomes empty.
Mode1: Enables monochrome print.
Mode2: Disables monochrome print.
B. Procedure
• The default setting is Mode1.
“Mode1” Mode2
10.21 IU Yield Settings
A. Use
• Sets the life detection timing of the imaging unit.
Standard : Detect the imaging unit life (prohibition of printing) as the specification
value.
Long : Change the threshold value of the imaging unit life (prohibition of printing)
detection, and extend the detection timing.
B. Procedure
• The default setting is Standard.
“Standard” Long
Symbol Panel display Part/signal name
Operation characteris-
tics/panel display
ON OFF
001/002
REYB
102
FB Home Sensor Scanner home sensor Home Out of
home
PS101 ADF Pickup
Sensor Pick-up sensor Paper
present
Paper not
present
PS102 ADF Doc Sensor Document sensor Paper
present
Paper not
present
REYB
100
ADF Deskew
Sensor Registration sensor Paper
present
Paper not
present
REYB
101
ADF Paper Out
Sensor Before read sensor Paper
present
Paper not
present
002/002
PS100 ADF Cover Sensor ADF door sensor Open Close
PS103 ADF Paper Gap
Sensor Paper interval sensor Paper
present
Paper not
present
Standard Long
Life (prohibition of printing) threshold value
(consumption rate)
105 % 150 %