Konica Minolta bizhub C35, Service Manual

Page: 192 / 330

DRAFT
Field Service V er. 1.0 Feb. 2010 10. SER V ICE MODE
153
bizhub C35
ADJUSTMENT
/ SETTING
10.9 Print Menu
10.9.1 Mgmt. List
A. Use
• Prints the management information of the machine.
• To check the maintenance information. The items which can be checked are as follows.
Device Caution Information : Caution information, Process caution information
Count (total)
: Counter value for each color
Coverage (total) : Coverage rate for each color
Replace count (total) : Number of times IU, TC, transfer belt, transfer roller, and
fuser unit have been replaced.
Imaging Unit Information : Information concerning the imaging unit
Toner Cartridge Information : Information concerning the toner cartridge
B. Procedure
1. Call the Service Mode to the display.
2. Touch [Print Menu]
→
[Mgmt. List].
3. Select [Print], and touch [OK].
C. Process Caution Information
(1) List of the process caution information
BIT Item Status
0
⎯ ⎯
1
⎯ ⎯
2
⎯ ⎯
3 Temperature/ humidity
sensor failure 1 • No response is provided from the temperature/ humidity sen-
sor.
0 • Power switch OFF/ON, and normal image stabilization are
complete besides the ones listed above.
4
⎯ ⎯
5 IDC Sensor failure 1 • IDC sensor output values are out of the specified range.
0 • Right door or front cover open/close, power switch OFF/ON,
and normal image stabilization are complete besides the
ones listed above.
6
⎯ ⎯
7
⎯ ⎯
8
⎯ ⎯
9
⎯ ⎯
10
⎯ ⎯
11 Color Shift Test Pattern
failure 1 • The number of points detected in the main scan direction is
more or less than the specified value during main scan direc-
tion registration correction.
• The number of points detected in the sub scan direction is
more or less than the specified value during sub scan direc-
tion registration correction.
0 • Right door or front cover open/close, power switch OFF/ON,
and normal image stabilization are complete besides the
ones listed above.